Axiom LFR1100HP Omnidirectional Speakers
- Regular price
- Rs. 871,720.00
- Sale price
- Rs. 871,720.00
- Regular price
-
Couldn't load pickup availability
Description
The LFR1100 is the brainchild of Andrew Welker and Ian Colquhoun. This omnidirectional wonder solves the problem of typical bipole or dipole speakers: they typically provide incredible depth of soundstage, but images tend to be ill-defined and washed-out.
By using a sophisticated DSP to tailor the response of each complement of drivers, front and rear, Axiom was able to overcome this bipole/dipole limitation to create the first omnidirectional speaker that preserves the spacious sound enthusiasts love, but with the same neutral tonal balance and pinpoint imaging for which Axiom speakers are renowned. The result? 2-D imaging is suddenly brought into a 3-D soundstage, immersing the listener and enveloping your senses. No matter where in the room you are!
Traditionally, bipole/dipole designs have been plagued by a persistent problem: the spacious presentation sounds great for a while, but eventually it becomes off-putting because you can't isolate soloists or pinpoint actions. Axiom met this challenge by innovating a way to apply psychoacoustic principals to create speakers that offer the best of both forward radiating and bipole designs. Extensive customization of the frequency response of the rear drivers, working in conjunction with a more subtle customization of the front drivers, creates a seamless soundstage with minimal roll-off at the top end, even at extreme angles away from the sweet spot. You'll still marvel at the sense of the speakers' soundfield opening up before you, but the image detail doesn't shift at all.
This speaker provides serious sound power: the amount of energy radiated into the room from 11 drivers will blow your mind! The front baffle features three High Powered 6.5-inch woofers, two 5.25-inch midrange/woofers, and two 1-inch tweeters, with our signature vortex port in the bottom. The rear baffle adds three more vortex ports, two more 5.25-inch midrange/woofers, and another two 1-inch tweeters. If you haven't guessed already, it takes some serious amplification to drive these speakers! Four matched channels of amplification in total, in fact: right front, left front, right rear, and left rear all need to be powered separately and it makes these speakers truly sing.
The DSP included with the LFR1100s separates the front right and left channels into these four channels. The DSP included is in a stand-alone case that sits between your preamplifier or receiver and the amplifier. The DSP accepts the main right and left channels from the preamplifier through RCA connects or from your receiver through High Level speaker connections and outputs right front, right rear, left front, and left rear channels for your amplifier.
You can also choose in Customize Yours some upgraded and integrated versions of the DSP. There is another stand-alone version of the DSP that does not have the High Level inputs but instead has both RCA and Balanced in and out. Then there are two version of and integrated DSP and amplifier. Both versions include our ADA1000-4 amplifier with the DSP built into it. The one version accepts either a pre-out or high level (speaker wire) out from your pre-amp or receiver. The other version will accept up to 3 independent sources (i-pod, CD player, etc) and has an input selector switch, a balance control, and a volume control on the front panel.
The speaker has a nominal impedance of 4 ohms, front and rear, and a frequency response of 31 Hz – 20 kHz -3dB and measures 48 inches / 1207 mm tall.
Axiom LFR1100HP Omnidirectional Speakers Specifications
|
Feature |
Specification |
|---|---|
|
Tweeters |
Titanium Tweeters |
|
Woofers and Midrange/Woofers |
Aluminum Woofers and Midrange/Woofers |
| Cabinet Design |
Anti-Standing-Wave cabinets to suppress internal resonances |
|
Port Design |
Vortex-ported cabinets to reduce port noise |
|
DSP |
Custom programmed DSP for full control over the Family of Curves |
|
Binding Posts |
5-way gold-plated binding posts |
Additional Specifications
| Feature | Specification |
|---|---|
| Enclosure | Triple Vortex / Reflex |
| Max RMS Amp Wattage | 600 Watts |
| Max Dynamic Amp Wattage | 2400 Watts |
|
Min Amp Power |
10 Watts |
|
Frequency Response +/-3dB (Hz) |
34 - 20k |
|
Frequency Response +3dB -10dB (Hz) |
27 - 20k |
|
Impedance (Ohms) |
4 Ohms |
|
SPL in Room 1w/1m (dB) |
93 dB |
|
SPL Anechoic 1w/1m (dB) |
89 dB |
|
Crossover Frequency |
200 Hz & 2 kHz |
|
Tweeter |
4 x 1" |
|
Midrange |
4 x 5.25" |
|
Woofer |
Triple 6.5" High Power |
|
Dimensions H W D (inches) |
47.5" x 9.25" x 17" |
|
Dimensions H W D (mm) |
1207 x 235 x 432 |
|
Weight (lbs) each |
88 lbs |
|
Weight (kg) each |
40 kgs |
|
Item Returns |
This item can be returned |
|
DSP - Max Output |
2Vrms |
|
DSP - Gain |
Unity |
|
DSP - THD |
<0.008% @ 1Vrms |
|
DSP - Signal to Noise Ratio (Input shorted, 22Hz-20kHz, un-weighted, Ref. 2V) |
102dB |
|
DSP - Digital Conversion |
24-bit, Sigma-Delta ADCs and DACs @ 96kHz Sampling Rate |
|
DSP - Power Consumption |
13W |
|
DSP - RCA Output (Single Ended) |
Yes |
|
DSP - High Level Input |
Yes |
|
DSP - AC Input Voltage |
115 or 230 |
|
DSP - Dimensions H W D (inches) |
3.5" |
|
DSP - Dimensions H W D (mm) |
88 x 450 x 425 |
|
DSP - Weight (lbs) each |
27 lbs |
|
DSP - Weight (kg) each |
12 kgs |
This table organizes all the specifications and features of the Axiom LFR1100HP Omnidirectional Speakers, along with the DSP-related details.
Up to 10 Years of Hassle-Free Warranty.
Many sellers offer products without service, but we’ve got you covered. Contact us to book your warranty, drop it in-store, or ship it to us for a refund or exchange for up to 10 years.
Book Your Private Cinema Experience
