Krix
KRIX - CYCLONIX 18
-
Regular price
-
Rs. 0.00
-
Sale price
-
Rs. 0.00
-
Regular price
-
- Unit price
-
/
per
For those who prefer a subwoofer with no built-in amplifier, the Cyclonix 18 provides a passive subwoofer experience, using a high excursion bass driver mounted in a high quality MDF enclosure. The proprietary Krix ‘X’ brace system is used to eliminate panel resonances.
The giant 455mm bass driver features a 100mm voice coil, powerful vented magnetic circuit and double spider assembly. The optimum cooling system provides fast heat exchange and reduced thermal power compression.
The dual front-vented enclosure is tuned to achieve maximum output, resulting in an incredibly efficient subwoofer for high drive level applications, while the unit’s proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces.
A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver.
Specifications
Frequency range
|
25Hz-200Hz in room response |
Amplifier power
|
200 – 1400* Watts RMS recommended amplifier power * The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on this subwoofer
|
Recommended processing
|
High pass filter: 20Hz 24dB / octave Butterworth Limiter: 1000W (8 Ohms)
|
Inputs
|
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
|
Enclosure type
|
Bass reflex, front vented
|
Impedance
|
8 Ohms
|
Low frequency driver
|
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
|
Sensitivity
|
100 dB SPL (2.83V / 1m)
|
Dimensions
|
1215mm high x 750mm wide x 310mm deep (330mm deep with optional grille)
|
Weight
|
64kg each |