KRIX - FLOORSTAND MEGAPHONIX IN ROOM
- Regular price
- Rs. 0.00
- Sale price
- Rs. 0.00
- Regular price
-
MEGAPHONIX IN-ROOM
Description
The Megaphonix In-Room are designed specifically for in room use in dedicated home cinemas. Using high power handling and high sensitivity drivers, these speakers will deliver all the impact and dynamics you need for a real home cinema experience, without the need for a big wattage power amplifier.
The 255mm bass driver has a 50mm voice coil and has been developed to offer low harmonic distortion, especially in the critical midband. The paper cone and surround of the bass driver have been developed to provide the smoothest possible response. The high frequency drive unit is a specially-damped, high power, 26mm doped fabric dome tweeter, and is coupled with Krix’s proprietary waveguide to provide consistently-maintained optimum dispersion of 90 degrees horizontal and 40 degrees vertical over the entire working bandwidth.
The combined high frequency response of the Megaphonix In-Room provides an exceptionally smooth and well-controlled sound – a new benchmark in loudspeaker reproduction.
The enclosure is braced and critically damped, with proprietary Krix rubber feet to improve acoustic isolation on hard or soft surfaces.
The Megaphonix In-Room a member of a five-speaker family, allowing you to combine it with main or surround speakers for a connected, clear and smooth sound experience.
For the ultimate cinema experience at home, play it through Krix.
Specifications
|
Frequency range |
40Hz-20kHz in room response |
|
Power handling |
50-250 Watts RMS recommended amplifier power |
|
Sensitivity |
95dB for 2.83 volts at 1 metre |
|
Impedance |
8 Ohms |
|
Configuration |
2-way |
| Enclosure type |
Bass reflex, front vented |
|
Low frequency driver |
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion |
|
High frequency driver |
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide |
|
Crossover point |
1.8kHz |
|
Input terminals |
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable |
|
Dimensions |
939mm high x 315mm wide x 205mm deep |
|
Weight |
19kg each |
Up to 10 Years of Hassle-Free Warranty.
Many sellers offer products without service, but we’ve got you covered. Contact us to book your warranty, drop it in-store, or ship it to us for a refund or exchange for up to 10 years.
Book Your Private Cinema Experience
