12000W/8-channel Flexible Amplifier with DSP and Dante™
The Ottocanali 12K4 DSP+Dis a flexible and reliable 8-channel power amplifier with up to a total of 12,000 W at 4Ω, ideal for multi-zone applications in medium to large-scale installs: Ottocanali 12K4 DSP+D supports any combination of lo-Z loudspeakers, mono-bridgeable channel pairs and 70V/100V Hi-Z distributed lines with no need for output step-up transformers. The Ottocanali 12K4 DSP+D features switchable main/aux signal inputs and offers a wide range of system control, alarms, GPI/O and monitoring functions as well as sound shaping options.
The Ottocanali 12K4 DSP+D implementsuniversal switch mode power supplies with PFC and patented SRM (Smart Rails Management) technology maximising reliability & efficiency and reducing power consumption.
New Ottocanali 12K4 DSP+D heralds new and innovative level of signal processing. Providing flexible routing and mixing, multi-stage equalisation with raised-cosine, IIR and FIR filters, delay up to 2 s in input processing and 100 ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters and Active DampingControl™.
Powersoft’s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum: the Ottocanali 12K4 DSP+D shines with outstandingly low power consumption and heat dissipation. This dramatically reduces costs from the AC mains supply and air conditioning/cooling systems – not to mention the benefits to the environment for a greener planet. MyPowersoft services are available for this product.
Features
Power Supply
Feature
Details
Power Supply
Universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
Output Filter
Patented output filter with ripple cancellation network
Inrush Limiting
Low Inrush Limiting reduces AC inrush current, eliminating the need for expensive power sequencers
Detachable AC Mains Cable
IEC C19/22.2 (16A for EU, 20A for USA) socket
Protections
Protection Type
Details
AC Protection
Shuts down power supply when AC mains voltage is outside operating range
Clip Limiter
Prevents severely clipped waveforms from reaching loudspeakers while maintaining full peak power output
DC Protection
Protects against infrasonic signal at the outputs
VHF Protection
Protects loudspeakers against non-audible, strong, non-musical high-frequency signals
Short Circuit Protection
Protects the amplifier from short circuits or stressful events for the output circuits with automatic protection reset
Long Term Limiter
Protects the loudspeaker against steady long-term RMS (non-audio) signals by reducing maximum output
Thermal Protection
Output stages operating temperature up to 80°C (176°F)
Cooling Fan
Temperature-controlled continuous variable speed fan with front-to-back airflow
General Features
Feature
Details
Switch Mode Output Stage
Fixed frequency switch mode output stage for high-grade sound accuracy
Rack Size
All models 2 RU for reduced rack cost and space
Weight
Lightweight – 14 kg / 30.8 lbs for easier racking and shipping
Connectors
Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms, and GPIO
Input Switching
Remotely switchable double input
Loudspeaker System Configuration
Direct drive of low impedance loads or 70V / 100V Hi-Z distributed lines
High Pass Filter
Switchable 35Hz / 70Hz high pass filter per channel
Mixed Configuration
Mixed configuration with Lo-Z/Hi-Z systems possible
Bridged Mode
Bridged mode with low impedance per channel pair
Processing
Feature
Details
DSP Architecture
TI C6000 DSP platform architecture
AD/DA Converter
Dual 24bit @ 96 kHz Tandem® architecture, 127 dB dynamic range, per channel
Many sellers offer products without service, but we’ve got you covered. Contact us to book your warranty, drop it in-store, or ship it to us for a refund or exchange for up to 10 years.
